Ball Valve For buffer drainage. On-off lever attaches to tubing for simplified buffer disposal. Replaces standard tubing adapters on sequencing units.
|
Aluminum Heat Dispersion Plate for use with SGP20-020 glass plate set. Effectively eliminates the smile effect by evenly distributing heat generated during electrophoresis. Safety coated, 6mm thick and electrically non-conductive.
|
Aluminum Heat Dispersion Plate for use with SGP20-030 glass plate set. Effectively eliminates the smile effect by evenly distributing heat generated during electrophoresis. Safety coated, 6mm thick and electrically non-conductive.
|
Aluminum Heat Dispersion Plate for use with SGP20-040A glass plate set. Effectively eliminates the smile effect by evenly distributing heat generated during electrophoresis. Safety coated, 6mm thick and electrically non-conductive.
|
Aluminum Heat Dispersion Plate for use with SGP20-050 glass plate set. Effectively eliminates the smile effect by evenly distributing heat generated during electrophoresis. Safety coated, 6mm thick and electrically non-conductive.
|
Drip Tray Gel pouring accessory for use with Gel Sliders GSL-1001 and GSL-2001 and 20cm wide glass plates.
|
Reusable, adhesive-backed temperature indicator strip adheres to glass plates. Monitors temperature range of 35-75 degrees Celcius.
|
Package of 10. Reusable, adhesive-backed temperature indicator strip adheres to glass plates. Monitors temperature range of 35-75 degrees Celcius.
|
Large White Spring Clamp Polypropylene. Jaws slightly open in the resting position. For clamping glass plates to the upper reservoir and holding aluminum heat dispersion plates in place.
|
Large White Spring Clamp Polypropylene. Jaws together in the resting position. For gel casting or holding thinner glass plate sandwiches together.
|
Multi-Task White Clamp Large capacity. Features 3 different resting positions and rotating arms that can be folded in either direction. For clamping over the glass plate notch during gel casting and during the loading of sharktooth comb samples.
|
For glass plate drying or storage. Made of high strength ABS with hand supports for ease in carrying large sequencing plates from bench to sink.
|
Pour plates as thin as 50 microns. Sliding plate technique uses capillary action to advance gel boundary resulting in bubble-free gels. Gel slider includes leveling feet and bubble level.
|
Yellow Mylar Tape for sealing of sequencing glass plate sets.
|
Yellow Mylar Tape for sealing of sequencing glass plate sets.
|
For use with 20cm wide sequencers. Includes 1 notched plate and 1 back plate. Low fluorescence background. Fluorescent images can be captured directly through glass using a fluorimeter.
|
For use with 20cm wide sequencers. Includes 1 notched plate and 1 back plate. Low fluorescence background. Fluorescent images can be captured directly through glass using a fluorimeter.
|
For use with 20cm wide sequencers. Includes 1 notched plate and 1 back plate. Low fluorescence background. Fluorescent images can be captured directly through glass using a fluorimeter.
|
Quick-Disconnect Coupling Body Body only. For 20cmW and 33cmW sequencing units. Attaches to drainage tubing. For use with quick-disconnect coupling insert QDC-I for buffer drainage.
|
Quick-Disconnect Coupling Insert Insert only. For 20cmW and 33cmW sequencing units. Features automatic shut-off valve. Threads into buffer reservoirs. For use with quick-disconnect coupling body QDC-B for buffer drainage.
|
|
Silicone Cord Repair Kit For vertical Mini-Gel units. Includes 48" of 5/32" white silicone cord.
|
Silicone Cord Repair Kit For vertical Sequencing and Slab Gel units. Includes 48" of 3/16" white silicone cord.
|
Rectangular Tooth Sequencing Comb: 0.2mm x 8 Well, for 20cm wide sequencers. Precision-machined polycarbonate.
|
Rectangular Tooth Sequencing Comb: 0.2mm x 12 Well, for 20cm wide sequencers. Precision-machined polycarbonate.
|
Rectangular Tooth Sequencing Comb: 0.2mm x 14 Well, for 20cm wide sequencers. Precision-machined polycarbonate.
|
Rectangular Tooth Sequencing Comb: 0.2mm x 16 Well, for 20cm wide sequencers. Precision-machined polycarbonate.
|
Rectangular Tooth Sequencing Comb: 0.2mm x 17 Well, for 20cm wide sequencers. Precision-machined polycarbonate. Designed for multi-channel pipettor loading.
|
Rectangular Tooth Sequencing Comb: 0.2mm x 20 Well, for 20cm wide sequencers. Precision-machined polycarbonate.
|
Rectangular Tooth Sequencing Comb: 0.2mm x 28 Well, for 20cm wide sequencers. Precision-machined polycarbonate.
|
Rectangular Tooth Sequencing Comb: 0.2mm x 32 Well, for 20cm wide sequencers. Precision-machined polycarbonate.
|
Rectangular Tooth Sequencing Comb: 0.2mm x 35 Well, for 20cm wide sequencers. Precision-machined polycarbonate. Designed for multi-channel pipettor loading.
|
Rectangular Tooth Sequencing Comb: 0.4mm x 8 Well, for 20cm wide sequencers. Precision-machined polycarbonate.
|
Rectangular Tooth Sequencing Comb: 0.4mm x 12 Well, for 20cm wide sequencers. Precision-machined polycarbonate.
|
Rectangular Tooth Sequencing Comb: 0.4mm x 14 Well, for 20cm wide sequencers. Precision-machined polycarbonate.
|
Rectangular Tooth Sequencing Comb: 0.4mm x 16 Well, for 20cm wide sequencers. Precision-machined polycarbonate.
|
Rectangular Tooth Sequencing Comb: 0.4mm x 17 Well, for 20cm wide sequencers. Precision-machined polycarbonate. Designed for multi-channel pipettor loading.
|
Rectangular Tooth Sequencing Comb: 0.4mm x 20 Well, for 20cm wide sequencers. Precision-machined polycarbonate.
|
Rectangular Tooth Sequencing Comb: 0.4mm x 28 Well, for 20cm wide sequencers. Precision-machined polycarbonate.
|
Rectangular Tooth Sequencing Comb: 0.4mm x 32 Well, for 20cm wide sequencers. Precision-machined polycarbonate.
|
Rectangular Tooth Sequencing Comb: 0.4mm x 35 Well, for 20cm wide sequencers. Precision-machined polycarbonate. Designed for multi-channel pipettor loading.
|
Comb: 0.75mm thick x 1 well Teflon comb for protein gels. For use with 20cm wide units.
|
Comb: 0.75mm thick x 2 Well Teflon comb for use with 20cm wide units.
|
Comb: 0.75mm thick x 3 Well Teflon comb for use with 20cm wide units.
|
Comb: 0.75mm thick x 4 Well Teflon comb for use with 20cm wide units.
|
Comb: 0.75mm thick x 8 Well Teflon comb for use with 20cm wide units.
|
Comb: 0.75mm thick x 12 Well Teflon comb for use with 20cm wide units.
|
Comb: 0.75mm thick x 14 Well Teflon comb for use with 20cm wide units.
|
Comb: 0.75mm thick x 16 Well Teflon comb for use with 20cm wide units.
|
Comb: 0.75mm thick x 17 Well Teflon comb for use with 20cm wide units. Designed for multi-channel pipettor loading.
|
Comb: 0.75mm thick x 20 Well Teflon comb for use with 20cm wide units.
|
Comb: 0.75mm thick x 28 Well Teflon comb for use with 20cm wide units.
|
Comb: 0.75mm thick x 32 Well Teflon comb for use with 20cm wide units.
|
Comb: 0.75mm thick x 35 Well Teflon comb for use with 20cm wide units. Designed for multi-channel pipettor loading.
|
Comb: 1.0mm thick x 1 Well Teflon comb for use with 20cm wide sequencers.
|
Comb: 1.0mm thick x 2 Well Teflon comb for use with 20cm wide units.
|
Comb: 1.0mm thick x 3 Well Teflon comb for use with 20cm wide units.
|
Comb: 1.0mm thick x 4 Well Teflon comb for use with 20cm wide units.
|
Comb: 1.0mm thick x 8 Well Teflon comb for use with 20cm wide units.
|
Comb: 1.0mm thick x 12 Well Teflon comb for use with 20cm wide units.
|